Brother printer are equipped with 802.11N WiFi technology that is extremely useful and allows it to adapt to wireless settings rapidly. When connecting the printer to the Wi-Fi network, it’s going to save all of the settings.
If you reboot the printer, it’s automatically connected to the network. If the user attempts to connect to the wireless network manually then you’ll encounter the error message that the Brother printer Can’t Connect to the WiFi.
There are many other reasons to consider, and the reasons this could take place. Let’s take a look at the possible reasons you may be facing this issue: also visit printer repair dubai.
Causes for the Brother Printer Won’t Connect To WiFi:
The printer brother isn’t able to connect to the Wi-Fi due to the following reasons:
- The printer is 8 meters from the router.
- The settings for the network aren’t the correct settings.
- The wireless password isn’t valid.
- The issue with the printer’s firmware
- The router’s firmware problem.
If you’re unable to connect your printer to the Wi-Fi network, you should follow these steps to fix the issue of connecting to Wi-Fi:
Restart the Devices:
- The first thing you should do is turn off the power to the printer.
- Then, the power of the access point also.
- After that , turn to the gadget one after one.
- If you notice that your printer has returned to the desktop you should attempt to connect your printer on Wi-Fi.
Keep the Printer Near the Router:
The Wi-Fi router will send signals to printers within the 10 meters range only. If your printer is over 8 meters to the router. The signal will be extremely low.
If that’s the case you’ll notice that the printer from Brother will continue to disconnect from Wi-Fi. Sometimes, users are notified that the Brother Printer won’t connect to WiFi.
In this scenario, you need to position the printer close to the access point for Wi-Fi and connect it to the network.
Reset the Network Settings:
If the printer was before connecting to Wi-Fi, it’s not joining the network once you change the wireless password of the router. This indicates that the printer is trying to connect using the network profile that was previously used.any other issue related to printer visit printer repair sharjah.
The reason for this is that the connection is not working. To fix the issue, you have to reset the settings for your router.
- The first thing you must do is power on your brother.
- Press the menu key or home key.
- Then, go to the network menu with the up and down arrow keys.
- If you’re using an LCD touch screen, you have to hit the next button to get there.
- Then , click on the option to reset your network.
Use the WPS Feature:
WPS is among the most efficient ways to connect the device to the Wi-Fi network. To use the feature, both devices must meet the requirements to become WPS compatible.
If you find that Brother Printer isn’t connecting to the WiFi network, then use the network key. It is necessary to use this feature to establish the connection. There are two methods of connecting via WPS. also visit any problem related to canon printer.
- Push-Button Method:
- Then, press an icon on your printer’s brother.
- After that, go to the network and hit the OK button.
- After that , press the key until you reach the WLAN option. Then hit the OK button.
- Select the WPS option, and then click OK.
- Then press the button.
- Then , you must visit the router, and then click the WPS button also.
- Then, you must remain off the device for at least 100-120 minutes. Then , they will be updated.
- Method of pin:
- In the beginning, select your WPS print option.
- Then apply the pin technique.
- Enter the WPS pin, which is accessible on the router.
- Then press on the button OK.