The ultrasonic mist maker uses electronic high-frequency oscillation (Frequency is 1.7MHz or 2.4MHz, this value has not harmful to people) to remove liquid water molecules through the high-frequency resonance of the ceramic mist maker. The product can produce a natural fog with elegant water without heating or adding chemical reagents. Compared with the heating mist maker method, it saves energy 90%. It also has the effect of cooling and humidifying, so it is often used in small supermarkets, pool landscaping, household cooling, mushroom houses, and plant growing houses.
Structure:
- High-frequency electric energy: The ultrasonic generator outputs high-frequency electric energy after energizing. The operating regulators on the mist maker panel include a power switch, a mist maker switch, and a fog volume adjustment knob.
- Sealing shell: Completely closed cover and waterproof sealant filling can prevent leakage and crack, effectively avoid short circuits.
- Dosing disinfection: The translucent membrane at the bottom of the mist maker tank is a sound-transmitting membrane. When the sound energy penetrates the membrane and the liquid medicine in the tank acts, the mist droplets are sprayed out.
Classification:
The misters maker has a series of models, from the single hole to multiple holes—different materials, from brass to stainless steel shell. Selecting the suitable mist maker model is very important.
Usage:
The mist maker uses high-efficiency integrated circuits, a unique structure design of ultra-small integration, and high-quality essential components. Hospital, industrial workshop, small greenhouse, garden design, etc., it is widely used in those scenes.
Instruction:
Different mist makers can be used according to other water qualities and purposes of use. For example, stainless steel materials mist makers are often used in areas with inadequate water quality, and glass-glazed materials mist makers are usually used in acid resistance environments. The mist maker has an automatic protection function for water cuts. The mist maker will automatically stop working when the water level is lower than the switch. When you use the mist maker, please do not put your hands on the top of the mist maker. Due to the high-frequency vibration, but this is not an electrical shock or leakage.
Reminder:
- Don’t put the transformer in water.
- The transformer cannot be sealed.
- When put the mist maker in the water, the water depth is at least 6 cm.
- Do not use it in the sun. It should be placed in a cool and ventilated place.
- Adjust the water level, turn the power on, and turn it up after power off.
Feature:
- It is more suitable for atomized water quality. Typically use tap water or municipal water start to work.
- A wide range of power supplies ensures that the mist maker can use commonly when the market changes significantly.
- It has a power polarity protection circuit to prevent users from damaging the product if connected reversely (the reverse connection does not work).
- Set up a power-on delay circuit to avoid the disproportionate impact of the switching power supply and damage to the course.
- The single nozzle line adopts a self-standing design. It adopts an over-current protection circuit to prevent one nozzle in the bar from burning the power supply and does not affect the regular operation of other nozzles.
- The expansion would cause a lot of damages to mist makers, so it can automatically be adjusted by the electronic. The current will decrease with increasing temperature to avoid severe power tube heating but won’t affect the fog effect.
check out our great blog.
