Are you planning to buy a suit for a special event due to a shortage of time? You might be thinking about whether to buy or not? Undoubtedly, fitting is the first concern that restricts a person from buying a suit.
So, in this situation, you always think about altering the suit. It is not just reducing or taking away the extra fabric, but men’s suit alterations are something more. The right alterations tricks help to provide the best look.
In this article, we have listed some of the important points to remember when you are performing a suit alteration. Let’s have a look.
Key Factors For Perfect Suit Alteration
1. Altering the Shoulders of a Suit Jacket
Never Touch Shoulder Width
First, we will mention the basic rule about the width of the shoulder. Start with the shoulders of the jacket of a suit, blazer, sport coat, or blazer. Never mess with the shoulder area because alterations are not recommended there.
Adjust the Pad Level From The Shoulder of a Suit
As the best bespoke tailoring service provider, you must know that padded shoulders can be changed. You can remove the padded shoulder from the suit in the alteration process. This might have some impact on the appearance of the shoulder portion of a suit. And in the end, it will improve the look and fit of an outfit.
Don’t Alter The Collar.
Never change the collar of a suit or jacket. The collar gap is the most noticeable thing in a suit, so don’t alter it because it will change the entire look of the suit. If you find the need for collar alteration, then try re-cutting or removing the collars.
2. Alter Jacket Sleeves
Narrow And Shortening The Sleeves
Sleeves are the easiest area of a jacket to alter. So, as a tailor, you can easily narrow the too large sleeves of a suit. Also, adding or shortening by half inches would not make any difference in the outlook of the suit. When you are shortening the sleeves, make sure to place the first button close to the end of the sleeve.
As a bespoke tailoring service provider, you need to balance the button with the length of the sleeves. Also, make sure first to remove the button and then short the sleeves of a suit.
Shoulder Divots
On the heavyweight fabric, you should fix the shoulder divots.
The sleeves are bound to the armhole of a jacket that doesn’t match how innately you hold your arms in the free place.
Or, the armhole is less than an opening of sleeves that attaches to it.
So be careful while rotating or removing the sleeve to match the posture of the customer. Shoulder divots are an easy thing for men’s suit alterations.
Putting Buttons
Make sure you use the high-quality button in alteration. For instance, if you are altering sleeves and you need an extra button, try to buy the same as the old ones.
Most of the time, seamstress shops or local tailors don’t buy quality material which makes a suit look inappropriate after alteration.
3. Altering The Body of The Suit
Don’t Change The Profile or Button
There are two different button profiles; one is a hard three-button on the right, and the second is a three-roll-two button jacket on the left.
It’s not easy to opt for subtracting buttons because converting a three-button into a two-button suit isn’t easy. It will need the additional buttonhole closure that can’t be done precisely. Moreover, subtracting buttons will affect the placement of the buttons.
Change The Lapels
You can turn the single-breasted jacket’s peak lapels into notch lapels. Just make sure you have enough fabric. Generally, peak lapels are wider and larger, so you can alter them successfully.
Peak Lapels
There will always be the issue with a lapel buttonhole. It is because the lapel buttonhole is supposed to go parallel to the edge of the lapel. Doing so will let you explore something new. For a successful alteration, we suggest, with a lapel, a hidden boutonniere loop.
Never Reshape The Jacket’s Quarters
A men’s suit alterations jacket shows the area below the bottom button and the lower front flaps of your suit jacket panels. It could be either closed, the flaps appear straight down if buttoned, or open if the panels are flared, cutaway, or curved out when buttoned.
Don’t Short The Jacket
Never try to shorten the jacket or suit because it looks odd with the design. Doing so will remove the buttons below as well as the neck design will look awkward on the jacket.
4. Alter Trouser of a Suit
Short the Leg, Hems, and Cuffs Length
You can easily shorten the legs of a pant or trousers in a suit. If it’s a high-quality suit then there will be extra fabric at the bottom of the trouser. If your customer wants then you can use extra fabric for cuffs.
Add or Reduce The Waist
As we know, waistlines fluctuate for every man, so it is needed to adjust the waist of pants as per the size of the customer. But remember you can do this to some extent for example; 2 to 3 inches not more than 6 inches.
On the other hand, in a high quality trouser you will find 3,4 inches of extra cloth. So, you can manage to loosen at least 4 inches in a pant or trouser of suit.
Decreasing Width From Legs
For a bespoke tailor, it’s easy to alter the pant from the legs and fit it according to the customer’s size. In fact, this is one of the well-known and easiest alterations.
Conclusion
So, are you ready to alter the suit with perfection? We hope this guide consists of all you need to create a perfect suit for your customers. Also, here you will learn all the dos and don’ts while altering an outfit.
The suit will look perfect if you perform alterations precisely. Moreover, if you have any other suggestions for alteration of the suit, then do let us know.